How Much Does Furnace Ignitor Replacement Cost in Denver?

TL;DR: Furnace Ignitor Replacement Cost in Denver

  • Professional furnace ignitor replacement in Denver generally costs around $150 to $500, while the ignitor itself may cost only $20 to $100.
  • A furnace that will not ignite does not automatically have a bad ignitor. Flame sensors, controls, wiring, pressure switches, and other components can cause similar symptoms.
  • Your final cost depends on the furnace brand and model, type of ignitor, accessibility, parts availability, and whether other problems are found.
  • Replacing an ignitor usually makes financial sense if the rest of the furnace is in good condition.
  • Accutrol charges $75 for a furnace diagnosis, and completed furnace repairs include a 1-year parts and labor warranty.

A furnace ignitor might cost only $20 to $100 as a part. Yet by the time a Denver homeowner gets the furnace diagnosed, repaired, and tested, the total bill can land somewhere around $150 to $500.

That price gap catches people off guard. We see it all the time. A homeowner searches the part online, sees a $40 ignitor, then wonders why the repair quote is several hundred dollars. But you are not just paying for the part. You are paying someone to figure out whether the ignitor is actually the problem, install the correct replacement, and make sure the furnace safely completes its ignition cycle afterward.

And that diagnosis matters!

A furnace that will not light could have a bad ignitor, but it could also be a flame sensor, control board, pressure switch, wiring issue, gas problem, or another component entirely.

In this guide, we’ll break down furnace ignitor replacement cost in Denver, what affects the price, how to recognize a possible ignitor problem, and how to avoid paying for a part your furnace may not actually need.

How Much Does Furnace Ignitor Replacement Cost in Denver?

For most homeowners, a realistic market range for professional furnace ignitor replacement in Denver is roughly $150 to $500.

That is intentionally a range.

Different current sources give very different numbers. Some list ignitor replacement around $150 to $300. Others list $250 to $500. Other Colorado pricing data puts Denver-area ignitor or flame-sensor work around $110 to $440.

National estimates vary too. Credible HVAC websites post professional furnace ignitor replacements around $150 to $300, while Today’s Homeowner gives a higher estimate of $300 to $425.

That is exactly why we would not tell a homeowner, “Your ignitor replacement will cost $250,” before looking at the furnace.

Typical Furnace Ignitor Costs

Item

Typical published range

Ignitor part only

$20 to $100

Professional replacement

$150 to $500

Accutrol furnace diagnosis

$75

Accutrol repair warranty

1 year parts and labor

These are market ranges, not a fixed Accutrol repair menu.

Your actual furnace ignitor replacement cost depends on what your specific furnace needs.

Why Can a $20 Furnace Ignitor Cost Hundreds of Dollars to Replace?

This is where homeowners understandably get frustrated.

You search the furnace model online, find an ignitor for $40, and then receive a repair quote for several hundred dollars.

So where is the rest of the money going?

You are not only paying for the small part.

You are paying for someone to determine that the ignitor is actually the failed component, safely access the furnace, install the correct replacement, reassemble the system, and make sure the furnace completes its ignition sequence correctly afterward.

National cost data commonly puts the raw ignitor around $20 to $100, with professional labor and service making up most of the remaining repair bill.

In our opinion, the diagnosis is the most important part of that entire process.

Anyone can throw a part at a furnace.

The goal is to replace the right part.

What Does a Furnace Ignitor Actually Do?

On many modern gas furnaces, the ignitor starts the combustion process.

A hot-surface ignitor uses electricity to heat an element until it becomes hot enough to ignite the gas entering the burners.

Think of the furnace startup sequence like a chain.

The thermostat calls for heat. Safety checks happen. The inducer runs. The ignitor heats up. Gas is released. The burners ignite. The furnace verifies flame. Then the blower eventually moves heated air through the home.

If the sequence stops at the ignitor, you may get no heat even though other parts of the furnace appear to be working.

If your furnace won’t turn on, the ignitor is one possibility, but power issues, thermostat problems, pressure switches, venting, controls, and other components can cause similar symptoms.

How Do You Know If Your Furnace Ignitor Is Bad?

A failed ignitor can leave several clues.

The Furnace Starts Its Sequence but the Burners Never Light

You may hear the furnace begin running but never see or hear the burners ignite.

That can point toward an ignition problem.

The Ignitor Does Not Glow

Many hot-surface ignitors glow brightly during startup.

If the furnace reaches the ignition stage but the ignitor never heats up, the ignitor itself, wiring, control board, or another part of the circuit may be involved.

Your Furnace Keeps Trying to Start

A furnace may repeatedly attempt its startup sequence when ignition fails.

If your furnace keeps turning on and off, however, do not assume the ignitor is responsible. Restricted airflow, overheating, thermostat issues, flame-sensing problems, and other faults can also cause repeated cycling.

Your Furnace Blows Cold Air

Ignition problems can also lead to a furnace blowing cold air.

Again, that symptom does not prove the ignitor failed. Thermostat settings, flame sensing, airflow, gas supply, and safety shutdowns can create similar behavior.

A Bad Ignitor and a Bad Flame Sensor Are Not the Same Thing

These two parts get confused constantly.

The ignitor starts the flame.

The flame sensor verifies that the flame actually exists.

That difference matters.

If an ignitor fails, it is normally replaced.

A flame sensor, on the other hand, may sometimes simply be dirty and need cleaning rather than replacement. This is one reason we do not like automatically replacing both parts just because one part of the ignition system is having trouble. Some people are being quoted for both components despite the furnace still operating.

Our approach is simple.

Test first. Replace what actually needs replacing.

What Affects Furnace Ignitor Replacement Cost?

Furnace Brand and Model

Some furnaces use inexpensive universal components.

Others need manufacturer-specific OEM parts.

That alone can change the furnace ignitor cost.

We at Accutrol service all furnace brands, so we look at the actual model and determine what part is appropriate rather than assuming every ignitor is interchangeable.

The Type of Ignition System

Hot-surface ignition is common in modern furnaces, but not every heating system uses the exact same ignition design.

Different components mean different part and labor costs.

Furnace Accessibility

A furnace in an open mechanical room is different from equipment crammed into a tight attic or difficult utility space.

Access affects how much time the repair takes.

Parts Availability

This becomes increasingly important as furnaces age.

An ignitor that is easy to source today may be harder to find for an older or discontinued furnace.

Other Problems in the Ignition Sequence

Sometimes the ignitor is not the entire story.

Electrical issues, controls, dirty burners, flame-sensing problems, or another component may also need attention.

If your furnace smells like burning, for example, we would also be paying attention to wiring, motors, airflow, burners, and signs of overheating rather than assuming one ignition component explains everything.

Can a Dirty Furnace Filter Damage an Ignitor?

Not usually in a simple direct cause-and-effect way.

But airflow problems can absolutely make a furnace run harder and hotter than it should.

A clogged or overly restrictive filter can reduce airflow and contribute to overheating and repeated safety shutdowns. Overheating puts additional stress on furnace components over time.

Our guide to furnace filters explains why filter size, MERV rating, fit, and replacement frequency matter more than homeowners sometimes realize.

It is also why regular maintenance is valuable. Understanding how often you should service a furnace in Colorado can help you catch developing problems before the furnace decides to quit during the coldest week of winter.

Can You Replace a Furnace Ignitor Yourself?

Technically, some homeowners can.

That does not automatically mean you should.

A hot-surface ignitor can be fragile. The furnace also combines electricity, natural gas, combustion, venting, and safety controls.

The bigger issue is diagnosis.

If you replace the ignitor because the furnace does not light, but the actual problem is the control board, pressure switch, gas supply, wiring, or another safety component, you have spent money without fixing the furnace.

We would rather see a homeowner spend money once on the correct repair.

Is Furnace Ignitor Replacement Worth It?

Usually, yes.

If the furnace is otherwise in good condition, an ignitor is normally a relatively small repair compared with replacing the entire heating system.

This is not the kind of repair that automatically makes us say, “You need a new furnace.”

Age and condition still matter.

If you have a 20-year-old furnace that has needed multiple major furnace repairs recently, then every new repair deserves a little more thought. Our guide on whether to repair or replace your furnace in Denver explains how we look at age, repair history, condition, reliability, and cost together.

For comparison, current furnace replacement cost in Denver often lands in the thousands of dollars. Spending a few hundred dollars on an ignitor for an otherwise healthy furnace can be an easy decision.

A completely different conversation starts when the furnace has a major safety or structural problem, such as the signs of a cracked furnace heat exchanger.

Context matters.

How to Avoid Paying for a Furnace Ignitor You Do Not Need

Before approving a furnace ignitor replacement, ask a few simple questions:

  1. What testing confirmed the ignitor failed?
  2. Is the ignitor visibly damaged or electrically failed?
  3. What replacement part does my furnace require?
  4. Does the price include diagnosis, parts, labor, and testing?
  5. What warranty comes with the repair?
  6. Are there any other problems affecting the ignition sequence?

You should be able to understand the answer without an HVAC degree.

That is one of our biggest opinions about furnace repair.

The homeowner should know what failed, why we believe it failed, what it costs to fix, and what happens if they choose not to fix it.

Furnace Ignitor Replacement in Denver With Accutrol

If your furnace is not heating, Accutrol Complete Home Services starts with a $75 furnace diagnosis.

We service all furnace brands throughout Denver and the surrounding area.

Once we determine what is actually causing the problem, we explain the repair and provide the price before work begins. Completed furnace repairs include a 1-year parts and labor warranty.

If an ignitor is the problem, we replace the ignitor.

If something else is wrong, we tell you that instead.

Simple as that.

Furnace Ignitor Replacement Cost in Denver: Know What You’re Paying For

Furnace ignitor replacement cost in Denver will typically fall somewhere around $150 to $500, but the number by itself only tells part of the story.

The ignitor may be inexpensive. Properly diagnosing the furnace, installing the correct part, and verifying that the entire ignition sequence is working safely are what turn a small component into a professional repair.

More importantly, a furnace that will not ignite does not automatically need a new ignitor.

That is why we believe diagnosis should come first.

At Accutrol Complete Home Services, we charge $75 to diagnose your furnace. We’ll figure out what is actually causing the problem, explain what we found, give you the repair price, and let you decide how you want to move forward. Our completed furnace repairs also include a 1-year parts and labor warranty.

If your furnace will not ignite, keeps trying to start, or is leaving your home without heat, schedule furnace service with Accutrol Complete Home Services and get the problem diagnosed before spending money on unnecessary parts.

FAQ: Furnace Ignitor Replacement Cost in Denver

How much does it cost to replace a furnace ignitor in Denver?

Published Denver-area pricing generally puts professional furnace ignitor replacement around $150 to $500. The exact cost depends on the furnace, replacement part, labor, access, and other issues found during diagnosis.

How much does a furnace ignitor cost by itself?

The part itself commonly costs about $20 to $100, with universal ignitors typically costing less than many OEM components.

How long does it take to replace a furnace ignitor?

The physical replacement can often be relatively quick once the problem is diagnosed and the correct part is available. Total service time also includes troubleshooting, safe access, installation, and testing the furnace afterward.

Can a furnace ignitor be repaired?

A failed hot-surface ignitor is typically replaced rather than repaired. These components are relatively small and fragile.

Why does my furnace ignitor keep going bad?

Repeated ignitor failures can be related to age, electrical problems, overheating, contamination, installation issues, or another underlying furnace problem. If multiple ignitors have failed, we would look beyond the ignitor itself.

Is an ignitor the same as a flame sensor?

No. The ignitor starts combustion. The flame sensor confirms that combustion has successfully started so the furnace can continue operating safely.

Does Accutrol charge a diagnostic fee for furnace problems?

Yes. Our furnace diagnostic fee is $75. Once we determine what failed, we give you the repair price before moving forward.

Does Accutrol replace furnace ignitors?

Yes. Accutrol diagnoses and repairs furnace ignition problems, including failed ignitors, throughout our Denver-area service territory.

Does Accutrol repair all furnace brands?

Yes. We service all furnace brands.

What warranty does Accutrol provide on furnace ignitor repairs?

Completed furnace repairs include a 1-year parts and labor warranty.

Does Accutrol offer same-day furnace ignitor replacement?

Same-day furnace service may sometimes be available depending on scheduling and parts availability, but it is not guaranteed. We do not provide 24-hour emergency furnace service.

What if the furnace is too old to justify replacing the ignitor?

An ignitor is usually a relatively minor repair, so furnace age alone does not automatically mean replacement is better. We look at the furnace’s age, overall condition, repair history, parts availability, safety, and expected remaining life before recommending a larger investment.